12F675 DIP-8 PIC IC 8Bit PIC Original
The PIC12F675 has a 13-bit program counter capable of addressing an 8K x 14 program memory space. The data memory is partitioned into two banks, which contain the General Purpose Registers and the Special Function Registers. The register file is organized as 64 x 8 in the PIC12F675 device. Each register is accessed, either directly or indirectly, through the File Select Register FSR. There are as many as six general purpose I/O pins available. Depending on which peripherals are enabled, some or all of the pins may not be available as general purpose I/O. In general, when a peripheral is enabled, the associated pin may not be used as a general purpose I/O pin.
The PIC12F675 has a 13-bit program counter capable of addressing an 8K x 14 program memory space. The data memory is partitioned into two banks, which contain the General Purpose Registers and the Special Function Registers. The register file is organized as 64 x 8 in the PIC12F675 device. Each register is accessed, either directly or indirectly, through the File Select Register FSR. There are as many as six general purpose I/O pins available. Depending on which peripherals are enabled, some or all of the pins may not be available as general purpose I/O. In general, when a peripheral is enabled, the associated pin may not be used as a general purpose I/O pin.
Features:-
- High-Performance RISC CPU:
- Only 35 Instructions to Learn
- All single-cycle instructions except branches
- Operating Speed:
- DC – 20 MHz oscillator/clock input
- DC – 200 ns instruction cycle
- 8-Level Deep Hardware Stack
- Interrupt Capability
- Direct, Indirect, and Relative Addressing modes
- Peripheral Features:
- 6 I/O Pins with Individual Direction Control
- High Current Sink/Source for Direct LED Drive
- Analog Comparator module with:
- One analog comparator
- Programmable on-chip comparator voltage reference (CVREF) module
- Programmable input multiplexing from device inputs
- Comparator output is externally accessible
- Analog-to-Digital Converter module (PIC12F675):
- 10-bit resolution
- Programmable 4-channel input
- Voltage reference input
- Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler
- Enhanced Timer1:
- 16-bit timer/counter with prescaler
- External Gate Input mode
- Option to use OSC1 and OSC2 in LP mode as Timer1 oscillator, if INTOSC mode selected
- In-Circuit Serial ProgrammingTM (ICSPTM) via two pins
Specification:-
Parameter |
Value |
Program Memory – Flash (Words) |
1024 |
Data Memory – Â SRAM (bytes) |
64 |
Data Memory – EEPROM (bytes) |
128 |
I/O |
6 |
10-bit A/D (ch) |
4 |
Comparators |
1 |
Timers Flash 8/16-bit |
1/1 |
Hilary Jansz (verified owner) –
Hilary Jansz –
Hilary Jansz (verified owner) –
Hilary Jansz –
Saminda (verified owner) –
Saminda –
Hilary Jansz (verified owner) –
Very good quality
Hilary Jansz –
Hilary Jansz (verified owner) –
Good product
Hilary Jansz –
Yasindu damith (verified owner) –
thank you very much. exactly delivered what I order. your quick response as well as it delivered within two days.
Yasindu damith –
Vipula (verified owner) –
Vipula –